Professional Development

The Professional Development Series of courses provide practical trainng for those that want to learn new skills or enhance existing skills. 

Each 3 month training course provides direct skills that can be applied in your workplace.

 

Emergency Shutdown Systems (ESD) are a fundamental part of the safety systems associated with oil and gas, utility and other hazardous processes. Associated with these systems are specific valves which are used to isolate and blowdown the processes. These are referred to as Shutdown (SDV) and Blowdown (BDV) Valves respectively. Under emergency situations it is critical that these valves operate correctly. Thus the engineering of the valves and their associated actuators is...

This course is for engineers and technicians who wish to develop their knowledge of the design and implementation of safety instrumented systems as applied to industrial processes. Safety control systems are widely used in hazardous processes to protect people, the environment and equipment against serious harm. Many countries look for compliance to international standards IEC 61508 and IEC 61511 as a benchmark of acceptable quality in design and management of safety controls.

This...

This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other. A selection of case studies are used to illustrate the key concepts with examples of real world working SCADA and PLC systems in the water, electrical and processing industries.

This course will be an excellent opportunity to network with your peers, as well as to gain significant new information and techniques for your next SCADA / PLC project. Although...

This practical course covers all the essentials of process control and tools to optimize the operation of your plant and process, and regards the process, from the primary measuring device, through the controller, right down to the final control element as a chain with important links. Controllers need to be carefully matched to the process to work optimally; this matching procedure is called tuning. Controllers that are not correctly configured and tuned will not perform optimally and will...

This program introduces the basic practices of controls systems and safety controls for industrial steam generating boilers. It focuses on the control and safety requirements applicable to most types of flame heated boilers from small commercial gas-fired units to large industrial multi-fuel installations.

The program will examine how control and instrumentation is designed to manage the main variables such as drum water level, furnace draft, stoichiometric fuel combustion and air assist...

Machine vision has progressed in leaps and bounds since the disappointments in the eighties with tremendous results achievable today. Nowadays, machine vision systems are highly effective and a key part of many industrial systems ranging from mineral processing to manufacturing. The fundamentals of image processing and machine vision are covered in the beginning to give everyone a solid foundation to work from. The program commences with an examination of optics and lighting - as the experts...

This course is for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of industrial instrumentation and control valves. In many respects a clear understanding and application of these principles is the most important factor in an efficient process control system.
 
This course is for those individuals primarily involved in achieving effective results for the industrial processes they are responsible for. This would involve...

Older (‘legacy’) substation automation protocols and hardware/software architectures provided basic functionality for power system automation, and were designed to accommodate the technical limitations of the technologies available at the time. However, in recent years there have been vast improvements in technology, especially on the networking side. This has opened the door for dramatic improvements in the approach to power system automation in substations. The latest...

 

This course provides a comprehensive technical approach to hazardous areas. It explains the subject of explosion protection applied to electrical equipment in such areas. The course offers detailed explanations of the principles involved, the techniques used, the management structures and requirements to comply with the harmonized international standards that are now in place. Where potentially flammable atmospheres are encountered in industrial processes, area classification is...

Control valves are the workhorse of our facilities, continually functioning to ensure our systems work as intended. A properly specified, engineered, designed, installed, and maintained control valve can be one of the most profitable investments a facility can have, while a control valve that "does not work well" can be an increased risk of injury (more exposure of maintenance personnel working on the valve), and disruption to your system.

With today's focus on data...

This course is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to mastering plant documentation and diagrams. It covers the flow of documentation from design through manufacture to maintenance and operations. The program looks at the applications of each diagram type detailing where and when the document should be used.

During the life span of any plant, a multitude of different vendors will supply plant...

COURSE OBJECTIVES

 At the end of this course you will be able to:

  • Understand the basics of control systems and PLC processors
  • Operate and navigate RSLogix 5000 software and associated platforms
  • Use ladder logic programming
  • Create and modify a project
  • Use PLC hardware such as I/O modules
  • Communicate across networks
  • Make design considerations
  • Make maintenance and troubleshooting considerations
  • Gain knowledge on an introduction to...

 

Electrical safety is an important issue for those working on electrical facilities in utility networks and large industrial installations. A number of serious accidents including fatalities occur every year due to accidents involving electricity resulting in huge financial losses and wasted man-hours. Arc flashes in electrical equipment are now considered one of the major causes of electrical accidents even surpassing the well known hazards of electric shock. Avoiding arc flash...

Latest Local News

How can an e-learning course be interactive?

Boredom can be a real danger, however, we use an interactive approach to our e-Learning – with live sessions instead of recordings.  The webinar software allows everyone to interact and involves participants in group work; including hands-on exercises with simulation software and remote laboratories where possible.  You can communicate with text messages, or live VoIP speech, or can even draw on the whiteboard during the sessions.

 

Go to top